We Undertake

  • Recron 3S
  • Applications
  • Specifications
  • Dosages

Recron© 3s, the New Generation "Secondary Reinforcement" for Construction Industry

Today, concrete is used in a variety of innovative designs because of its many valuable properties such as high compressive strength, stiffness, low thermal and electrical conductivity and low combustibility and toxicity. However, concrete is also known to be brittle and weak in tension and develops cracks during curing, due to thermal expansion and contraction over a period of time.

The recent development of Secondary reinforcement in Concrete in various fields has provided a strong technical base for improving these deficiencies.

Reliance brings you the cutting edge technology via Recron© 3s, a speciality secondary reinforcement material developed after extensive research at Reliance Technology Centre.

Recron 3S has a wide number of applications in the construction industry.

Concrete:

Floor, slab, beam, piles, retaining walls, lintel, road, bridges, airport runways etc.

Advantages

  • Improves homogeneity of the concrete by reducing segregation of aggregates.
  • Reduces shrinkage cracks/micro cracks
  • Increses abrasion resistance by more than 25%.
  • Increses impact and shatter resistance by 100%
  • Increses ductility,compressive,flexural and tensile stregth
  • Reduces water permieablity which helps prevent correction of primary steel
  • Incrses energy absorption capability of concrete
  • Replaces or reduces non structural steel in floors,roads and pavment i.e. slab on grade helps increses joint spacing.

PLASTER

Internal Plaster, External Plaster, Gunnite, Shortcrete, Decorative precast Panel

Advantage:

  • 1.Reduces rebond loss by 50%-70%
  • 2. Checks dampness, saves on repainting cost
  • 3. improved shatter resistance in walls.
  • 4. Checks cracks propogation while cutting groves for conduit laying

PLASTER OF PARIS(POP)

Advantage:

Checks rebound loss,reduces cracks ,speeds up work and gives a nice look to the wall

PRE-CAST MATERIAL

Blocks,pavers,tiles,pipe and railway slepeers

Advantage:

Low curing time promotes high productivity

Reduced breakage during production / transists and placement improves resistance to abrasion shatter and impact

Specifications

Cut length: 3mm, 4.8mm, 6mm or 12mm.

Shape of Recron 3S: Scientifically designed for improved holding of cement and aggregates.

Melting point: >250 degree centigrade.

Dosages

  • Concrete: Use 12mm@900 gms/cubic metre
  • Plaster: Use 4.8mm@100gms/cement bag or 6mm@125 gms/cement bag in 1:4 cement/sand ratio
  • Plaster of Paris: Use 3mm@50gms/20kg of POP

Enquiry for Recron 3S